For Sale/Lease

  • APV Sterling Extruder, 400 HP

    APV Sterling Extruder, 400 HP

    December 22, 2014
    One (1) used APV Sterling Extruder. Electrically-heated, water-cooled barrel with circulation system, jacketed feed section, 68" center line height; 6 inches, 32:1 L/D; 400 HP DC motor with SCR controller; 17.5:1 gear box ratio; 100 RPM screw…


  • Metaplast Vacuum Tank, Model MVS-SP

    Metaplast Vacuum Tank, Model MVS-SP

    December 19, 2014
    One (1) used Metaplast Vacuum Tank, Model MVS-SP. With stainless steel construction, 14" x 14" x 20' long tank; vacuum pump, circulation pump, heat exchanger and resevoir, 575 volts. Serial #792026. Type: Extrusion Downstream &ra…


  • Cumberland Granulator, Model 50H, 200 HP

    Cumberland Granulator, Model 50H, 200 HP

    December 17, 2014
    One (1) used Cumberland Granulator, Model 50H. With 20" x 50" feed opening, 18-blade solid helical rotor, with feed hopper; 200 HP, 440 volt, 1185 rpm motor; and 48" wide x 23' long x 10' discharge height belt conveyor. Cumb…


  • Pharmatech De-Duster Metal Detector Combination Unit, Model Combi-500CE

    Pharmatech De-Duster Metal Detector Combination Unit, Model Combi-500CE

    December 16, 2014
    One (1) used Pharmatech De-Duster Metal Detector Combination Unit, Model Combi-500CE. With stainless steel product contact surfaces, Pharmatech tower tablet de-duster with CEIA metal check with reject; mounted on unitized base. Serial #0806469S, n…


  • Berringer Hydraulic Slide Plate Screen Changer, Model 26

    Berringer Hydraulic Slide Plate Screen Changer, Model 26

    December 15, 2014
    One (1) used Berringer Hydraulic Slide Plate Screen Changer, Model 26. With dual breaker plates, 8 inches, and 3 HP hydraulic power pack. Type: Extrusion Downstream » Screen Changer Quantity: 1 Inches: 8 Manufacturer: BERRINGER I…


  • Douglas Machine Bottom-Load Horizontal Cartoner, Model CM

    Douglas Machine Bottom-Load Horizontal Cartoner, Model CM

    December 11, 2014
    One (1) used Douglas Machine Bottom-Load Horizontal Cartoner, Model Continuous Motion. Can perform at up to 83 packs per minute, with Nordson ProBlue 7 Hot-Melt Glue System; with dual-lane infeed with starwheels to lay product down; includes Allen…


  • American Process Ribbon Blender, Model DRB-120

    American Process Ribbon Blender, Model DRB-120

    December 10, 2014
    One (1) used American Process Ribbon Blender, Model DRB-120. With 120 cu ft working capacity, stainless steel construction, approximately 44" wide x 120" long x 52" deep trough, double ribbon, outboard roller bearings, chain & s…


  • Farrel Banbury Internal Rotor Lab Mixer, Model BR

    Farrel Banbury Internal Rotor Lab Mixer, Model BR

    December 9, 2014
    One (1) used Farrel Banbury Internal Rotor Lab Mixer, Model BR. With two (2) wing rotors, 96 cubic inch (1.57 Liter) chamber, approx. 2.6 pound batch; with 440 volt, 3-phase 4-speed motor 25/17/12.5/8.3 HP at 1750/1160/870/575 RPM; Serial #60A1072…


  • IWKA Rotary Tube Filler, Model TFS 30M&H

    IWKA Rotary Tube Filler, Model TFS 30M&H

    December 8, 2014
    One (1) used IWKA Rotary Tube Filler, Model TFS 30M&H. Rated at speeds up to 200 tubes/minute, designed for both metal and plastic tubes; 20-station rotary fill table, coding station, nitrogen blanket system, vacuum pump, triple fold station w…


  • Thomas Engineering Compulab Coating Pan, Model CPL-36

    Thomas Engineering Compulab Coating Pan, Model CPL-36

    December 5, 2014
    One (1) used Thomas Engineering Compulab Coating Pan, Model CPL-36. With stainless steel construction, integrally mounted controls with 36" and 24" perforated pans with lift; 3 phase, steam heated, spray guns, 460 volts. Serial #175, new…


  • Dott. Bonapace Capsule Filler, Model IN-CAP

    Dott. Bonapace Capsule Filler, Model IN-CAP

    December 4, 2014
    One (1) used Dott. Bonapace Capsule Filler, Model IN-CAP. With stainless steel construction, capsule orientation station with hopper, liquid filling station with heated hopper, pellet filling station with hopper, powder filling station with hopper…


  • Metaplast Cleated Belt Puller, Model PC8-84

    Metaplast Cleated Belt Puller, Model PC8-84

    December 3, 2014
    One (1) used Metaplast Cleated Belt Puller, Model PC8-84. With 84" long x 8" wide cleated belts, operator panel and air pressure controls. Serial #496002. Type: Extrusion Downstream » Puller Quantity: 1 Size: 84" X 8&q…


  • Glatt Fluid Bed Dryer Granulator, Model GPCG15

    Glatt Fluid Bed Dryer Granulator, Model GPCG15

    December 2, 2014
    One (1) used Glatt Fluid Bed Dryer Granulator, Model GPCG15. With stainless steel construction, 10 bar shock rated with 68 liter top spray and 27 liter top spray inserts; steam heated with air handling unit, HEPA filter, blower, controls and opera…


  • Bosch Blister Packaging Line, Type Servac NT25

    Bosch Blister Packaging Line, Type Servac NT25

    November 28, 2014
    One (1) unused Bosch Blister Packaging Line, Type Servac NT25. Consists of the following: (1) Bosch Blister Machine single or double lane, rated up to 250 blisters/minute, 155 mm max web width, 151 mm max lidding material width, 180 x 145mm max pr…


  • Vector Fluid Bed Dryer Granulator, Model FLM1

    Vector Fluid Bed Dryer Granulator, Model FLM1

    November 27, 2014
    One (1) used Vector Fluid Bed Dryer Granulator, Model FLM1. Stainless steel construction with one (1) wurster and one (1) spray granulation chamber on stainless steel base; 3/60, 230 volts. Serial #FL-189 44420. Type: Dryers » Fluid Bed…